208 Agilent X-Series Signal Generators SCPI Command Reference
Analog Modulation Commands
Frequency Modulation Subsystem–Option UNT ([:SOURce])
*RST 50.0
:FM[1]|2:INTernal:DUAL:FUNCtion2:POFFset
Supported All Models with Options UNT and 303
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion2:POFFset <value><unit>
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion2:POFFset?
This command sets the phase offset in degrees or radians of tone 2 in relation to tone 1 of the
internal dual function generator source.
*RST 0.000 rad
:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:FREQuency
Supported All Models with Options UNT and 303
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:FREQuency <value><unit>
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:FREQuency?
This command sets the frequency of tone 1 (default) or tone 2 of the internal dual function generator
source.
*RST 400.0 Hz
:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe
Supported All Models with Options UNT and 303
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe SINE|TRIangle|SQUare|RAMP
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe?
This command sets the shape of tone 1 (default) or tone 2 of the internal dual function generator
source.
*RST SINE
:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe:RAMP
Supported All Models with Options UNT and 303
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe:RAMP POSitive|NEGative
[:SOURce]:FM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe:RAMP?
Range 0 to 100.0%
Key Entry FM Tone 2 Ampl % of Peak
Range - 6.290 to 6.290 rad
- 360.4 to 360.4 deg
Key Entry FM Tone 2 Phase Offset
Range 100.0 mHz to 6.25 MHz
Key Entry FM Tone 1 Freq FM Tone 2 Freq
Key Entry FM Tone 1 Waveform FM Tone 2 Waveform
To Next Page
Loading...
Need help?
General
