388 Agilent X-Series Signal Generators SCPI Command Reference
Real–Time Commands
Custom Subsystem–Option 431([:SOURce]:RADio:CUSTom)
:EDCLock
Supported N5172B/82B with Option 431
[:SOURce]:RADio:CUSTom:EDCLock SYMBol|NORMal
[:SOURce]:RADio:CUSTom:EDCLock?
This command sets the external data clock use.
SYMBol
This choice specifies that a continuous symbol clock signal must be provided to the
SYMBOL SYNC input connector.
NORMal This choice specifies that the DATA CLOCK input connector requires a bit clock. The
SYMBOL SYNC input connector requires a (one-shot or continuous) symbol sync
signal.
*RST NORM
Key Entry Ext Data Clock Normal Symbol
:FILTer
Supported N5172B/82B with Option 431
[:SOURce]:RADio:CUSTom:FILTer RNYQuist|NYQuist|GAUSsian|RECTangle|IS95|
IS95_EQ|IS95_MOD|IS95_MOD_EQ|AC4Fm|UGGaussian|"<user FIR>"
[:SOURce]:RADio:CUSTom:FILTer?
This command selects the pre- modulation filter type.
IS95
This choice selects a filter that meets the criteria of the IS-95 standard.
IS95_EQ This choice selects a filter which is a combination of the IS-95 filter (above) and the
equalizer filter described in the IS-95 standard. This filter is only used for IS-95
baseband filtering.
To Next Page
Loading...
Need help?
General
