272 Agilent X-Series Signal Generators SCPI Command Reference
Arb Commands
Dmodulation Subsystem–N5172B/82B with Option 431 ([:SOURce]:RADio:DMODulation:ARB)
*RST EPT1
[:STATe]
Supported N5172B/82B with Option 431
[:SOURce]:RADio:DMODulation:ARB[:STATe] ON|OFF|1|0
[:SOURce]:RADio:DMODulation:ARB[:STATe]?
This command enables or disables the digital modulation capability.
ON (1) This choice sets up the internal hardware to generate the currently selected digital
modulation format signal selection.
OFF (0) This choice disables the digital modulation capability.
*RST 0
Key Entry Digital Modulation Off On
Key Path Mode > ARB Custom Modulation > Digital Modulation Off On
Remarks When On is selected, the I/Q state is activated and the I/Q source is set to
internal.
Key Entry Patt Trig In 1 Patt Trig In 2
To Next Page
Loading...