Benelli TNT125 Service Manual

Notes before Maintenance
Please read the following precautions before checking, disassembling or assembling motorcycles. In order to
facilitate the actual operation, the chapters are provided with notes, illustrations, pictures, precautions and detailed
descriptions. This section describes the special precautions during the removal and reassembly or disassembly and
reassembly of common parts.
Pay special attention to the following matters:
Battery Grounding
Before any operation is conducted for the
motorcycle, disconnect the battery wire and battery to
prevent the engine from start
ing accidentally.
Disconnect the negative wire (-) and then disconnect
the positive wire (+). After the operation is completed,
connect the positive wire (+) to the positive terminal
(+) of the battery and then connect the negative wire
(-) to the negative terminal (-).
Sharp Edge of Part
To avoid that the hands are scratched by the sharp
edges of parts, gloves must be worn when the
larger-size or heavier parts are moved.
Solvent
The solvent with high flash point shall be used
when parts are cleaned. Use the solvent with high flash
point according to the instructions provided by the
solvent manufacturer.
- 21 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload