Benelli TNT125 - Troubleshooting; Drive System Trips over Stop or Is out of Gear; The Noise of Engine Is too Large

Troubleshooting
Drive system trips over stop or is out of gear
·Positioning roller rocker is damaged
·Positioning roller rocker spring is damaged or its elasticity is weakened
·Positioning roller rocker bolt is loosened
·Shift fork shaft or shift fork is bent or damaged
·Gearshift star wheel is bent or damage
d
·Shift fork is bent or damaged
The noise of engine is too large
· The gear of drive system is damaged
· The bearing of drive system is damaged
- 264 -