Benelli TNT125 Service Manual

Replacing oil
●After the engine becomes hot, place the motorcycle
vertically and make it be perpendicular to the ground.
●Remove the oil drain bolt [A] to discharge the oil
.
○Place an appropriate container under the oil drain bolt
[A] to collect the oil.
●Drain: oil in the crankcase.
●Tighten the oil drain bolt.
Tightening torque of oil drain bolt: 25-28 N·m
●O
pen the oil filler cap [A]
●Pour the oil of the specified type according to the
specified quantity.
- 98 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload