Benelli TNT125 Service Manual

Throttle Cable
Make throttle cable go
into the right front
***
among upper
connecting plate and
head cover
Tightly tie the throttle
cable at the frame using
a rubber fastener,
and
make throttle cable go
into the inside of frame
from here
Make throttle cable go
along the outside of
frame
Make the throttle
cable go through the
upper clamp of
ignition coil
Make the throttle
cable go through the
upper clamp of
ignition coi
l
Make the throttle
cable go through the
clamp at the inside of
frame
- 470 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload