Benelli TNT125 - Technical Parameters

Technical Parameters
Item
Standard
Use limit
Wheel (rim)
Rim oscillation:
Axial ≤TIR 0.5 mm TIR 1.0 mm
Radial
≤TIR 0.8 mm
TIR 1.0 mm
Wheel axle oscillation /100 mm ≤TIR 0.03 mm TIR 0.2 mm
Wheel balancing ≤10 g –––
Balance weight
10 g, 20 g, 30 g
–––
Rim dimensions:
Front wheel 3.0×12 –––
Rear wheel 3.5×12 –––
Tire
Tire pressure (when the tire is being
cooled):
Front wheel
190±10kPa
–––
Rear wheel 220±10kPa –––
Tread depth:
Front wheel 5 mm 1 mm
Rear wheel
5 mm
1 mm
Standard tire: Manufacturer, model Specifications
Front wheel
Cheng Shin / Pattern CM-502-1/3C
Mark /DOT/7FG7
120/70-12
Rear wheel
Cheng Shin /Pattern
CM-502-1/3CMark /DOT/7FRQ
130/70-12
Warning
Front and rear whee
ls must be the products of the
same manufacturer!
- 284 -