Benelli TNT125 Service Manual

electrical start-up safety circuit-related
components operation checking section)
2. Ignition system troubleshooting (see the
ignition system section)
3. Electronic control unit voltage inspection (see
the electronic control unit power inspection
section in the chapter of electronic fuel injection
system (ECU))
ECU Group
●System inspection
●Remove the ECU group and check the parts related to
the ignition system at the wiring terminal. (See the
electronic fuel injection system, ECU section)
- 442 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload