Benelli TNT125 Service Manual

Special Tools
The following Special Tools are needed for complete and correct adjustment and assembly; use the correct
Special Tools to avoid the damages caused by improper tools or non-professional technology. In different
countries, the specific tools which need to be used may vary. During ordering tools, please refer to the following
information to prevent any errors.
Internal circlip plier Negative pressure meter
FRONT FORK BUSH jig 4T+7T KST03BL01127
Jack: Jack accessories:
Oil filter wrench
Pilot screw adjuster adapter φ5
：
Pilot screw adjuster adapter C
：
Throttle sensor adjuster adapter
- 55 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload