Troubleshooting
Clutch lever is too hard to pull
·The detaching mechanism of clutch is damaged
·The detaching bearing of clutch fails
·The push rod of clutch is not installed properly
Clutch is slipping when accelerating
·The friction plate of clutch is worn
·The clutch spring is not elastic enough
·Engine oil is mixed with molybdenum or graphite additives
Clutch does not disengage or clutch disengages suddenly during the running of motorcycle
·Clutch plate is wrapping
·Clutch lock nut is loosened
·The oil level is too high
·Oil viscosity is poor
·The detaching mechanism of clutch is damaged
·The push rod of clutch is not installed properly
- 246 -
To Next Page
