EasyManuals Logo

Benelli TNT125 Service Manual

Benelli TNT125
485 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #456 background imageLoading...
Page #456 background image
Status Indicator Light
Turn indicator light (green)
If this indicator light is flashing, the turn signal
light is on.
Neutral indicator light (green)
If
this indicator light is on, the motorcycle is in a
neutral state.
High b
eam indicator (blue)
If
this indicator light is on, the high beam light is
on.
Oil
pressure warning light (Red).
If this indicator light is on, the fault code of EFI
system (yellow) is diagnosed.
When the key is turned on, the EFI indic
ator light
will be on and the fuel pump will operate for 3
seconds. At this
time, the motorcycle is started. If the
indicator light goes out after the motorcycle
starts, the motorcycle is normal and there is no
fault; if the indicator light is on, there is a fault. In
the same way, if the light is off during running,
the motorcycle is running normally. If the
indicator light is on, the motorcycle has a fault
and needs to be stopped and checked. Please
contact Motorcycle Dealer to check the motorcycle
with the dedicated motorcycle fault diagnostic
apparatus. Function Buttons
Function
Function switching
Function switching
Function switching
Function switching
Function switching
Function switching
Function switching
Close setting
Note
Key function table
Power
Current interface
display
Left key
Right key
Displayed interface after
switching
<
3 seconds
<
3 seconds
<
3 seconds
<
3 seconds
<
3 seconds
<
3 seconds
<
3 seconds
<
3 seconds
<
3 seconds
TRIP A clearing
TRIP B clearing
Hour bit is flashing
Hour bit + 1 (0-23)
Switch to the ten’s place of
minute to flash
Ten’s place of minut +1 (0-5)
Switch to the unit’s place of
minute to flash
Unit’s place of minut +1 (0-9)
Exit clock menu
In the state of clock adjustment, it will automatically exit the menu when the key is not pressed for 5 seconds
- 453 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benelli TNT125 and is the answer not in the manual?

Benelli TNT125 Specifications

General IconGeneral
Displacement125 cc
Transmission5-speed
Fuel SystemEFI
Fuel Capacity7.2 liters
Seat Height780 mm
Dry Weight116 kg
Bore x Stroke54 mm x 54.5 mm
Starting SystemElectric
Wheelbase1215 mm
Engine TypeSingle cylinder, 4-stroke, air-cooled
Front SuspensionUpside-down fork
Front BrakeSingle disc
Rear BrakeSingle disc
Front Tire120/70-12
Rear Tire130/70-12
Max Power8.2 kW (11.1 Cv) @ 9500 rpm
Rear SuspensionSwing arm with lateral shock absorber with adjustable spring preload

Related product manuals