Benelli TNT125 Service Manual

●Remove the gasket of cylinder head cover.
Checking Cylinder Head Cover
●Check cylinder head cover
★If it is seriously worn, replace it.
Installing Cylinder Head Cover
●Install the cylinder head cover in the reverse order of
disassembly.
○When cylinder head cover is removed and reinstalled
every time, the gasket of cylinder head cover must be
replaced with a new one.
○When installing, ensure that the gasket is installed in
the gasket groove, and that the gasket groove and the
cylinder head mounting surface should be cleaned and
free of debris.
- 254 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload