Benelli TNT125 Service Manual

Others
Applying Lubricant to Frame Parts
●The rust must be removed with rust remover before
any parts are lubricated and the grease, oil, stain or dirt
shall be removed.
●Lubricate the following positions with the specified
lubricant.
Remark
○If the motorcycles are used in humid environment
or on rainy days, especially when the motorcycles
are sprayed and washed with high-
pressure water,
the relevant parts must be lubricated in
accordance with the following specifications.
Pivot shaft: lubricated with grease
Brake handle
Brake pedal
- 89 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload