Benelli TNT125 - Page 45

General Technical Parameter
Item BJ125-3E
Front suspension system:
Type Inverted, extension-sleeve, oil damping absorber
Total travel 125mm
Rear suspension system:
Type
Single-cylinder, hydraulic spring, damping absorber
Total travel 51mm
Brake type:
Front wheel Single disc φ220mm
Rear wheel Single disc φ190mm
Electrical equipment
Battery
12V-6Ah
Head light:
Type
Semi-closed reflected light beam
Bulb:
High beam light LED
Low beam light
LED
Tail light/stoplight
12V/（LED）
Alternating-current
generator:
Type : Three-phase alternating-current generator
Rated output power
12.8V/200W/8500 rpm
If some changes are made, there will be no further notice and the changes may not be applicable in every country.
- 42 -