Benelli TNT125 Service Manual

Strictly Prohibiting the Modification of Noise
Control System
Federal law prohibit anyone from doing or instigating others to do the following: (1) Any person removes
any part or make it inoperative before the final buyer purchases or receives any new motorcycle or in the course of
the use of motorcycle, unless there is a need to repair, maintain or replace this part; (2) any person continues to
use the motorcycle after removing any part of any motorcycle or making it inoperative.
The following acts belong to “modification of motorcycle”:
 Replace the original exhaust system or muffler with parts that do not comply with federal regulations.
 Remove muffler or any of its internal components.
 Remove air filter or its cover.
 Modify muffler or inlet system by means of cutting, drilling or otherwise, to increase noise level.
2

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload