Benelli TNT125 Service Manual

Bolts, Nuts and Fasteners to Be Checked
Engine:
Bolt lock nut of clutch lever pivot,
Mounting bolts and nuts of engine,
Mounting bolts and nuts of hanging plate of engine,
Branch holder nut of exhaust pipe,
Clamp bolt of muffler,
Mounting bolt of muffler cylinder I,
Mounting bolt of muffler cylinder II;
Wheel:
Front wheel axle and nut,
Front wheel axle and nut,
Sprocket bolt and nut;
Brake:
Bolt lock nut of brake lever pivot,
Bolts of brake pedal,
Mounting bolts of calipers,
Clamp bolts of front upper pump,
Joint cotter pin of rear master cylinder,
Mounting bolt of rear master cylinder,
Reservoir mounting bolt of rear master cylinder,
Mounting bolt of CBS cylinder,
Reservoir mounting bolt of CBS cylinder,
Oil-passing bolt of brake pipe
Oil-passing bolt
Suspension system:
Clamp bolt of upper bracket,
Tightening bolt of
front shock absorber of upper
bracket,
Tightening bolt of front shock absorber of lower
bracket,
Upper mounting of rear shock absorber,
Lower mounting of rear shock absorber,
Lock nut of swing arm pivot shaft;
Steering gear:
Handlebar fixer bolts,
Bolt at steering column head;
Others
Foot stool pedal bracket mounting bolts
Side stand bolts
- 93 -

Benelli TNT125 Specifications

General

Displacement	125 cc
Transmission	5-speed
Fuel System	EFI
Fuel Capacity	7.2 liters
Seat Height	780 mm
Dry Weight	116 kg
Bore x Stroke	54 mm x 54.5 mm
Starting System	Electric
Wheelbase	1215 mm
Engine Type	Single cylinder, 4-stroke, air-cooled
Front Suspension	Upside-down fork
Front Brake	Single disc
Rear Brake	Single disc
Front Tire	120/70-12
Rear Tire	130/70-12
Max Power	8.2 kW (11.1 Cv) @ 9500 rpm
Rear Suspension	Swing arm with lateral shock absorber with adjustable spring preload