The Control List
Manpack Transceiver 2110 series Reference Manual 255
Uninstalling the RM50 HF Data Modem
If the RM50 HF Data Modem is no longer being used and you want to physically remove
it from the system, you also need to remove it from the memory of the transceiver.
To remove the RM50 from the memory of the transceiver:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Devices, then press .
1 Scroll to Uninstall: RM50, then hold .
A pop-up showing Modem info: Removed: RM50 is displayed.
1 Press until Main Menu is displayed.
Displaying the firmware version of your transceiver
If you need to check the firmware version of your transceiver, use the Firmware version
setting under the Devices entry in the Control List.
To display the firmware version of your transceiver:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Devices, then press .
1 Scroll to Firmware version, then press .
The firmware version is displayed.
Displaying the product name of your transceiver
To display the product name of your transceiver:
1 Press until Main Menu is displayed.
1 Scroll to Control, then press .
1 Scroll to Devices, then press .
1 Scroll to Product name, then press .
The product name is displayed.