Operating the transceiver
80 Manpack Transceiver 2110 series Reference Manual
Setting up a scan list
To set up a scan list:
1 Hold to open Quick Start.
1 Scroll to Set scan list, then press .
The first channel in the transceiver is displayed.
1 If you want to add this channel to the scan list, press .
If you do not want to add this channel to the scan list, press .
When all the channels have been viewed or you have added 15 channels to your scan
list, the transceiver returns to Quick Start.
If you do not want to scroll through all the channels in your scan list, hold to
return to Quick Start.
1 Press to close Quick Start, if required.
Setting the time and date
To set the time and date:
1 Hold to open Quick Start.
1 Scroll to Set time/date, then press .
The display appears with a line under the year.
1 Use or to change the current setting to the correct value, then press .
The line appears under the month.
1 Repeat the previous step until you have made all of the changes to the time and date.
When all the changes have been made, the transceiver returns to Quick Start.
1 Press to close Quick Start, if required.
CAUTION
Each time you enter Set scan list, the resulting scan list overwrites
the existing scan list.
To Next Page
Loading...
Need help?
General
