Icom IC-7100

9
D-STAR OPERATION <ADVANCED>
9-36
Repeater list programming (Continued)
Position data accuracy level setting11.
When the Repeater Search function is not used, or
the distance between your position and a repeater is
not displayed, select “OFF.”
$0 Touch “POSITION”.
$1 Touch the position data accuracy level.
• None: Select when the repeater has no position
data.
• Approximate: Select when the programmed position data
is approximate.
• Exact: Select when the programmed position data
is exactly correct.
Latitude programming12.
This item appears only when “Approximate” or “Ex-
act” is selected in ‘11. Position data accuracy level
setting.’
$2 Touch “LATITUDE,” to enter the latitude data edit
mode.
• A cursor appears and blinks.
$3 Touch the desired number to input the latitude.
• Touch [CE](D) to delete the selected number.
• Touch [f](D) to move the cursor backwards, or touch
[g](D) to move the cursor forwards.
• Touch [N/S](D) to toggle between N and S modes.
$4 After entering, touch [ENT](D).
Longitude programming13.
This item appears only when “Approximate” or “Ex-
act” is selected in ‘11. Position data accuracy level
setting’.
$5 Touch “LONGITUDE,” to enter the longitude data edit
mode.
• A cursor appears and blinks.
$6 Touch the desired number to input the longitude.
• Touch [CE](D) to delete the selected number.
• Touch [f](D) to move the cursor backwards, or touch
[g](D) to move the cursor forwards.
• Touch [E/W](D) to toggle between E and W modes.
$7 After entering, touch [ENT](D).
☞ Continued on the next page.
Touch
“LATITUDE”
Touch
“POSITION”
Touch
“LONGITUDE”
Touch [ENT]
Touch [ENT]
Example:
“Approximate
”
Previous view