10
GPS/GPS-A OPERATION
10-10
Adding or editing GPS memory (Continued)
7. GPS memory group programming
@7 Touch “GROUP:” to enter the group programming
mode.
@8 Touch the desired group between (No Group) or A to
Z.
• When the group is selected, automatically returns to the
“GPS MEMORY EDIT” screen.
• A total of up to 100 memories can be stored.
8. Writing GPS memory
@9 Touch “<<Add Write>>,” and then touch [YES]
(D) to
write the programmed GPS memory.
• If a previously added GPS memory is edited, select
“<<Overwrite>>.”
• The data is added to the GPS memory, and then displays
its data screen.
To cancel the programming data:
To cancel the programmed data, push
(C) to dis-
play the “Cancel edit?” screen.
Touch [YES](D) to cancel programming and the dis-
play returns to the GPS Memory channel screen.
To Next Page
Loading...
