Icom IC-7100 - Page 360

20
CONTROL COMMAND
20-7
Command table (Continued) D
Remote jack (CI-V) information
Cmd. Sub cmd. Data Description
1A 05 0074 see p. 20-11 Send/read the WIDE SSB TX
bandwidth
0075 see p. 20-11 Send/read the MID SSB TX band-
width
0076 see p. 20-11 Send/read the NARROW SSB TX
bandwidth
0077 00 to 10 Send/read the AM TX tone (Bass)
level
(00=–5 to 10=+5)
0078 00 to 10 Send/read the AM TX Tone (Treble)
level
(00=–5 to 10=+5)
0079 00 to 10 Send/read the FM TX tone (Bass)
level
(00=–5 to 10=+5)
0080 00 to 10 Send/read the FM TX Tone (Treble)
level
(00=–5 to 10=+5)
0081 00 to 10 Send/read the DV TX tone (Bass)
level
(00=–5 to 10=+5)
0082 00 to 10 Send/read the DV TX Tone (Treble)
level
(00=–5 to 10=+5)
0083 00/01 Send/read the USB audio squelch
setting
(00=OFF (OPEN), 01=ON)
0084 00/01 Send/read the ACC and USB
output setting
(00=AF, 01=IF)
0085 0000 to
0255
Send/read the ACC and USB AF
output Level
(0000=0% to 0255=100%)
0086 0000 to
0255
Send/read the ACC and USB IF
output Level
(0000=0% to 0255=100%)
0087 0000 to
0255
Send/read the ACC modulation
level
(0000=0% to 0255=100%)
0088 0000 to
0255
Send/read the DATA modulation
level
(0000=0% to 0255=100%)
0089 0000 to
0255
Send/read the USB modulation
level
(0000=0% to 0255=100%)
0090 00 to 03 Send/read the modulation input set-
ting in the DATA mode OFF
( 00=MIC, 01=ACC, 02=MIC,ACC,
03=USB)
0091 00 to 03 Send/read the modulation input set-
ting in the DATA mode ON
( 00=MIC, 01=ACC, 02=MIC,ACC,
03=USB)
0092 00/01 Send/read the external keypad set-
ting for VOICE
(00=OFF, 01=ON)
0093 00/01 Send/read the external keypad set-
ting for Memory KEYER
(00=OFF, 01=ON)
0094 00/01 Send/read the external keypad set-
ting for RTTY Memory
(00=OFF, 01=ON)
0095 00/01 Send/read the CI-V transceive
setting
(00=OFF, 01=ON)
Cmd. Sub cmd. Data Description
1A 05 0096 00 to 02 Send/read the “USB2” (COM port)
function setting
( 00=OFF, 01=RTTY Decode,
02=DV Data)
0097 00 to 03 Send/read the [DATA1] function
setting
( 00=OFF, 01=RTTY Decode,
02=DV Data, 03=GPS)
0098 00/01 Send/read the GPS output setting
(00=OFF, 01=DATA1USB2)
0099 00/01 Send/read the DV or GPS data
transfer speed
(00=4800 bps, 01=9600 bps)
0100 00 to 04 Send/read the RTTY decode speed
( 00=300 bps, 01=1200 bps,
02=4800 bps, 03=9600 bps,
04=19200 bps)
0101 00 to 02 Send/read the band setting for
the [ACC] socket’s pin 7 (VSEND
usage)
(00=OFF, 01=UHF, 02=VHF/UHF)
0102 00/01 Send/read the 9600bps Mode
setting
(00=OFF, 01=ON)
0103 0000 to
0255
Send/read the LCD contrast setting
(0000=0% to 0255=100%)
0104 0000 to
0255
Send/read the LCD Backlight set-
ting
(0000=0% to 0255=100%)
0105 0000 to
0255
Send/read the Key Backlight setting
(0000=0% to 0255=100%)
0106 00/01 Send/read the Meter Peak Hold
setting
(00=OFF, 01=ON)
0107 00/01 Send/read the PBT shifting value
display setting while rotating [TWIN
PBT]
(00=OFF, 01=ON)
0108 00/01 Send/read the IF filter width and
shifting value display setting when
the IF filter is switched
(00=OFF, 01=ON)
0109 00 to 02 Send/read the RX Call sign display
setting
( 00=OFF, 01=AUTO, 02=Auto (RX
Hold))
0110 00/01 Send/read the RX message display
setting
(00=OFF, 01=ON)
0111 00/01 Send/read the RX position display
setting when the received Auto
Reply signal includes the position
(00=OFF, 01=ON)
0112 00 to 02 Send/read the TX Call sign display
setting
( 00=OFF, 01=Your Call Sign,
02=My Call Sign)
0113 00/01 Send/read the Scroll Speed setting
(00=Slow, 01=Fast)
0114 00/01 Send/read the VOICE TX Name
Display setting
(00=OFF, 01=ON)
0115 00/01 Send/read the KEYER Memory
Display setting
(00=OFF, 01=ON)
Previous view