Icom IC-7100 - Page 359

20
CONTROL COMMAND
20-6
Command table (Continued) D
Remote jack (CI-V) information
Cmd. Sub cmd. Data Description
1A 05 0035 00/01 Send/read the Speaker output
setting
(00=OFF, 01=ON)
0036 00/01 Send/read the MIC AF output set-
ting
(00=OFF, 01=ON)
0037 00 to 22 Send/read the function of [F-1] on
the HM-151
( 00=---, 01=P.AMP/ATT, 02=AGC,
03=NB, 04=NR, 05=NOTCH,
06=RIT, 07=AUTOTUNE/RX>CS,
08=TS, 09=MPAD, 10=M-CLR,
11=BANK, 12=SPLIT, 13=A/B,
14=DUP, 15=TONE/DSQL,
16=COMP, 17=TBW, 18=METER,
19=DR, 20=FROM/TO (DR),
21=SCAN, 22=Voice TX (T1))
0038 00 to 22 Send/read the function of [F-2] on
the HM-151
( 00=---, 01=P.AMP/ATT, 02=AGC,
03=NB, 04=NR, 05=NOTCH,
06=RIT, 07=AUTOTUNE/RX>CS,
08=TS, 09=MPAD, 10=M-CLR,
11=BANK, 12=SPLIT, 13=A/B,
14=DUP, 15=TONE/DSQL,
16=COMP, 17=TBW, 18=METER,
19=DR, 20=FROM/TO (DR),
21=SCAN, 22=Voice TX (T1))
0039 00/01 Send/read the SSB mode selection
of the [MODE] key on the HM-151
(00=OFF, 01=ON)
0040 00/01 Send/read the CW mode selection
of the [MODE] key on the HM-151
(00=OFF, 01=ON)
0041 00/01 Send/read the RTTY mode selec-
tion of the [MODE] key on the
HM-151
(00=OFF, 01=ON)
0042 00/01 Send/read the AM mode selection
of the [MODE] key on the HM-151
(00=OFF, 01=ON)
0043 00/01 Send/read the FM mode selection
of the [MODE] key on the HM-151
(00=OFF, 01=ON)
0044 00/01 Send/read the DV mode selection
of the [MODE] key on the HM-151
(00=OFF, 01=ON)
0045 00/01 Send/read the WFM mode selection
of the [MODE] key on the HM-151
(00=OFF, 01=ON)
0046 00/01 Send/read the Power OFF setting
when no controller is connected.
(00=OFF, 01=ON)
0047 0000 to
0255
Send/read the REF Adjust setting
( 0000=0%, 0128=50%,
0255=100%)
0048 00 to 02 Send/read the RX Call Sign
SPEECH setting
( 00=OFF, 01=ON (Kerchunk),
02=ON (All))
0049 00/01 Send/read the RX>CS SPEECH
function setting
(00=OFF, 01=ON)
Cmd. Sub cmd. Data Description
1A 05 0050 00/01 Send/read the S-Level SPEECH
function setting
(00=OFF, 01=ON)
0051 00/01 Send/read the MODE SPEECH
function setting
(00=OFF, 01=ON)
0052 00/01 Send/read the speech language
(00=English, 01=Japanese)
0053 00/01 Send/read the Alphabet setting for
SPEECH
(00=Normal, 01=Phonetic Code)
0054 00/01 Send/read the speech speed set-
ting
(00=Slow, 01=Fast)
0055 0000 to
0255
Send/read the speech level
(0000=0% to 0255=100%)
0056 see p. 20-11 Send/read the SSB RX HPF/LPF
setting
0057 00 to 10 Send/read the SSB RX Tone (Bass)
level
(00=–5 to 10=+5)
0058 00 to 10 Send/read the SSB RX Tone
(Treble) level
(00=–5 to 10=+5)
0059 see p. 20-11 Send/read the AM RX HPF/LPF
setting
0060 00 to 10 Send/read the AM RX tone (Bass)
level
(00=–5 to 10=+5)
0061 00 to 10 Send/read the AM RX Tone (Treble)
level
(00=–5 to 10=+5)
0062 see p. 20-11 Send/read the FM RX HPF/LPF
setting
0063 00 to 10 Send/read the FM RX tone (Bass)
level
(00=–5 to 10=+5)
0064 00 to 10 Send/read the FM RX Tone (Treble)
level
(00=–5 to 10=+5)
0065 see p. 20-11 Send/read the DV RX HPF/LPF
setting
0066 00 to 10 Send/read the DV RX tone (Bass)
level
(00=–5 to 10=+5)
0067 00 to 10 Send/read the DV RX Tone (Treble)
level
(00=–5 to 10=+5)
0068 00 to 10 Send/read the WFM RX Tone
(Bass) level
(00=–5 to 10=+5)
0069 00 to 10 Send/read the WFM RX Tone
(Treble) level
(00=–5 to 10=+5)
0070 00 to 10 Send/read the CW RX HPF/LPF
setting
0071 00 to 10 Send/read the RTTY RX HPF/LPF
setting
0072 00 to 10 Send/read the SSB TX Tone (Bass)
level
(00=–5 to 10=+5)
0073 00 to 10 Send/read the SSB TX Tone
(Treble) level
(00=–5 to 10=+5)
Previous view