Intel Arria 10 User Manual

You can create your Quartus
®
Prime project first, and then instantiate the various IPs
required for your design. In this case, specify the location to save your IP HDL files.
The current version of the PHY IP does not have the option to set the speed grade.
Specify the device family and speed grade when you create the Quartus Prime project.
You can also instantiate the PHY IP directly to evaluate the various features.
To instantiate a PHY IP:
1. Open the Quartus Prime software.
2.
Click Tools ➤ IP Catalog.
3. At the top of the IP Catalog window, select Arria 10 device family
4.
In IP Catalog, under Library ➤ Interface Protocols, select the appropriate PHY
IP and then click Add.
5. In the New IP Instance Dialog Box, provide the IP instance name.
6. Select Arria 10 device family.
7. Select the appropriate device and click OK.
The PHY IP Parameter Editor window opens.
2. Implementing Protocols in Arria 10 Transceivers
UG-01143 | 2018.06.15
Intel
®
Arria
®
10 Transceiver PHY User Guide
34

Intel Arria 10 Specifications

General

Transceiver Data Rate	Up to 17.4 Gbps
Transceiver Protocols Supported	CPRI, JESD204B
Transceiver Power Consumption	Varies depending on configuration and data rate. Refer to Intel Arria 10 device power estimation tools.
Transceiver Features	Clock data recovery
Power Consumption per Channel	Varies depending on data rate and equalization settings. Refer to Intel Arria 10 device power estimation tools.
Transceiver Type	FPGA integrated transceiver
Operating Temperature Range	-40°C to 100°C (Industrial)
Number of Transceiver Channels	up to 96 full-duplex