Nokia 7360 Intelligent Services Access Manager FX Series User Manual

ANSI Hardware Installation Manual Installing cards in the 7360 ISAM FX-16 shelf
Issue: 09 3HH-12893-AAAA-TCZZA 133
DRAFT
7.6.2.2 Cards with optical fiber connectors
Observe the following.
Figure 58 shows a laser classification label.
Figure 58 Laser classification label
Procedure 22 To install NT cards
Use this procedure to install network termination (NT) cards in an 7360 ISAM FX-16.
A 7360 ISAM FX-16 has one or two NT cards:
• a single (first) NT card is inserted in slot NTA
• a redundant card, if any, in slot NTB
Figure 59 shows the 7360 ISAM FX-16 NT cards in the slots.
Danger — Risk of eye damage or skin burns by laser emission.
When installing optical cards or handling optical fibers, never
look inside connectors of cards or fibers when these are not
connected.
Put end caps on open connectors to protect against
unexpected emission.
Caution — Risk of damage by ESD when card is not
connected.
This card contains devices that are susceptible to damage
caused by ESD in unconnected circuit conditions.
Carefully follow ESD safety precautions.
CLASS 1 LASER PRODUCT
18256

Nokia 7360 Intelligent Services Access Manager FX Series Specifications

General

Brand	Nokia
Model	7360 Intelligent Services Access Manager FX Series
Category	Network Hardware
Language	English