ANSI Hardware Installation Manual Connector pinning of the external interfaces
Issue: 09 3HH-12893-AAAA-TCZZA 441
DRAFT
25 Connector pinning of the external
interfaces
25.1 Overview
25.2 BITS interface connections
25.3 ToD/1 Hz connector
25.4 Remote craft port connector
25.5 CO external alarm connector
25.6 MDF CHAMP100 cable connector
25.1 Overview
This section describes the pinning of the external interfaces on the 7360 ISAM FX
shelf units.
• BITS interface connections
• ToD/1 Hz connector
• Remote craft port connector
• CO external alarm connector
• MDF CHAMP100 cable connector
25.2 BITS interface connections
Table 18 describes the BITS interface pinning for the 7360 ISAM FX-4,
7360 ISAM FX-8 and 7360 ISAM FX-12 shelves.
Note — For CO external alarm connector pinning information,
see your Nokia representative.