ANSI Hardware Installation Manual Installing a 7360 ISAM WM shelf
Issue: 09 3HH-12893-AAAA-TCZZA 393
DRAFT
21 Installing a 7360 ISAM WM shelf
21.1 Overview
21.2 Installing a drip tray below a 7360 ISAM WM shelf
21.3 Mounting the 7360 ISAM WM shelf in a 23 in. rack
21.1 Overview
This chapter describes the procedure for installing a 7360 ISAM WM shelf in a 23 in.
rack, and for installing a drip tray beneath the 7360 ISAM WM shelf.
21.2 Installing a drip tray below a 7360 ISAM WM
shelf
In compliance with safety standards, a drip tray must be installed below each
7360 ISAM WM shelf for protection from heat and falling particles that may cause
damage to the equipment.
Figure 229 shows a view of the 7360 ISAM WM drip tray.
Figure 229 View of drip tray for 7360 ISAM WM