Nokia 7360 Intelligent Services Access Manager FX Series User Manual

Installing cards in the 7360 ISAM FX-4 shelf
366
ANSI Hardware Installation Manual
3HH-12893-AAAA-TCZZA Issue: 09
DRAFT
The 7360 ISAM FX-4 can be equipped with a maximum of 4 LT cards, 2 NT cards,
and 1 NTIO card.
19.3 Dummy front panels
Dummy front panels must be mounted on any unused slot of a shelf to:
• ensure EMC compliance
• ensure thermal compliance through correct airflow in the shelf
• ensure safety by avoiding direct contact with backplane connectors
At slot deployment, the dummy front plate is replaced by the appropriate card and
the optical cables are connected to the card.
For more information on specific dummy front panels, see the 7360 ISAM FX Product
Information Guide.
19.3.1 NT dummy front panel
A dummy front panel must be used when the second NT card is not installed.
Figure 210 shows the dummy front panel for NT card slots.

Nokia 7360 Intelligent Services Access Manager FX Series Specifications

General

Brand	Nokia
Model	7360 Intelligent Services Access Manager FX Series
Category	Network Hardware
Language	English