Nokia 7360 Intelligent Services Access Manager FX Series - Figure 178 Mounting the 7360 ISAM FX-4 Pre-Assembled Skirts and Bracket

ANSI Hardware Installation Manual Installing a 7360 ISAM FX-4 shelf
Issue: 09 3HH-12893-AAAA-TCZZA 323
DRAFT
Figure 178 Mounting the 7360 ISAM FX-4 pre-assembled skirts and bracket
9 Orient the intumescent panel horizontally over the top of the skirt assembly aligning the
holes, and attach it to the skirt assembly using the M3 × 14 mm screws as shown in Figure
179.
Note — Torque the intumescent panel screws to 4.3 in. to 6.3 in. per lbs
after placing it on top the skirt assembly.
23580