Nokia 7360 Intelligent Services Access Manager FX Series - Parts List

ANSI Hardware Installation Manual Installing a 7360 ISAM FX-4 shelf
Issue: 09 3HH-12893-AAAA-TCZZA 331
DRAFT
17.3.2 Parts list
The following parts are required:
• 7360 ISAM FX-4 shelf (NFXS-F)
• grounded 23 in. rack that can accommodate the 7360 ISAM FX-4 shelf
• horizontal shelf mount kit rack containing:
• shelf horizontal brackets (x2)
• 12-24 × 1/2 in. (12.7 mm) screws
• 6-32 × 3/8 in. (9.53 mm) screws
• vertical shelf mount kit containing:
• rack adapter brackets
• pre-assembled top cross bracket, rear skirt and front skirt
• pre-assembled shelf horizontal mount bracket and air intake baffle/drip tray
• intumescent panel
• top baffle
• 12-24 × 1/2 in. (12.7 mm) screws
• M3 × 5/16 in. (8 mm) screws
• M3 × 9/16 in. (14 mm) screws
• M3 × 9/16 in. (14 mm) screws
• 12-24 × 1/2 in. (12.7 mm) screws
• fan unit (BFAN-X)
• general facilities card, if replacing (NGFC-G)
• cables:
• 50-pin micro DSUB connector
• DB-9 connector
• RJ-45 connector
• 6-pin wire-wrap right angle header connector
• 120-pin FCI power blade connector