EasyManua.ls Logo

Olympus nortec 600 - Getting Started Guide - all languages; Heat exchanger tubing accessories - for N600 D model only

Olympus nortec 600
374 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DMTA-10040-01EN, Rev. E, February 2018
Appendix A334
Environmental
conditions
Operating
temperature
10 °C to 50 °C (14 °F to 122 °F)
Storage temperature 0 °C to 50 °C (32 °F to 122 °F) [with batteries]
20 °C to 70 °C (4 °F to 158 °F) [without
batteries]
IP rating Designed to meet requirements of IP66
Drop tested Method 516.6 Procedure IV, 26 drops, package
for shipment
Shock tested MIL-STD-810F, Method 516.5 Procedure I, 6
cycles each axis, 15G, 11 ms half sine shock
testing
Vibration tested MIL-STD-810F, Method 514.5, Procedure I,
Annex C, Figure 6, general exposure: 1 hour each
axis vibration test
Protective bag
operation
Knobless mode is used to calibrate signals when
unit is placed in protective bag.
Batteries Battery model and
type
600-BAT-L-2 (Li-ion) [U8760058]
Single lithium-ion rechargeable battery or AA-
size alkaline batteries (in 8-cell holder)
Battery quantity 1
Battery storage
temperature
0 °C to 50 °C (32 °F to 122 °F) at 80 % relative
humidity
Battery charge time 4.3 hours when charging inside the instrument
or when using an optional external battery
charger
Battery life Over 10 hours for standard operation and
6 hours to 8 hours when operating rotating
scanners
Battery size Height: 22.3 mm (0.9 in.)
Length: 214.6 mm (8.5 in.)
Width: 58.9 mm (2.4 in.)
Table 8 General and environmental specifications (continued)
Category Parameter Va lue

Table of Contents

Other manuals for Olympus nortec 600

Related product manuals