Olympus nortec 600 - Page 4

DMTA-10040-01EN, Rev. E, February 2018
Table of Contentsiv
1. Instrument Overview ................................................................................ 21
1.1 Operating Principle ................................................................................................... 21
1.2 Contents of the Case ................................................................................................. 22
1.3 Connectors ................................................................................................................. 23
1.4 Power Requirements ................................................................................................. 26
1.4.1 Charger/Adaptor ............................................................................................ 27
1.4.2 Battery Compartment .................................................................................... 30
1.4.3 Lithium-Ion Battery ....................................................................................... 31
1.4.4 Alkaline Batteries ........................................................................................... 32
1.5 Optional microSD Card Installation ....................................................................... 33
1.6 NORTEC 600 Hardware Features .......................................................................... 34
1.6.1 Hardware Overview ...................................................................................... 35
1.6.1.1 Front Panel and SmartKnob ............................................................... 36
1.6.1.2 Keypad .................................................................................................. 37
1.6.2 Connectors ....................................................................................................... 42
1.6.2.1 Probe and BNC Connectors ............................................................... 42
1.6.2.2 Input/Output (I/O) and VGA OUT Connectors .............................. 42
1.6.2.3 microSD and USB Port ........................................................................ 44
1.6.3 Various Hardware Features .......................................................................... 45
1.6.3.1 Instrument Stand ................................................................................. 45
1.6.3.2 O-Ring Gasket and Membrane Seals ................................................ 46
1.6.3.3 Display Protection ............................................................................... 46
1.6.4 Environmental Ratings .................................................................................. 46
2. Software User Interface ............................................................................ 49
2.1 Starting Up the Instrument ...................................................................................... 49
2.1.1 Navigating the Application Menu ............................................................... 50
2.1.2 Main Inspection Screen ................................................................................. 51
2.2 Selecting from the Menus ........................................................................................ 54
2.3 Displaying All Functions Simultaneously — ALL SETTINGS Menu ............... 54
2.3.1 Using the ALL SETTINGS Menu ................................................................. 55
2.3.2 Special Functions in the ALL SETTINGS Menu ........................................ 56
2.4 Displaying Real-Time Readings ............................................................................. 56
2.4.1 Enabling Real-Time Readings on the Main Inspection Screen ................ 59
2.4.2 Enabling the Real-Time Readings in Full-Screen Mode — FULL NEXT
key .................................................................................................................... 60
3. Initial Setup ................................................................................................ 63
3.1 Setting the User Interface Language and the Decimal Symbol .......................... 63
3.2 Setting the Clock ....................................................................................................... 64
3.3 Changing the Location of Saved Files .................................................................... 64