Omron FQ2-S/CH Series User Manual

Reading with OCR
FQ2-S/CH User’s Manual
167
4
Setting Up Inspections
Set or Acquire the Date and Time
Since the Sensor does not have date and time information, setting or acquirement of date and time is
necessary for Calendar Matching function.
Set or acquire the Date and Time by any the following methods.
Set the Date and Time information automatically when TouchFinder is connected to the Sensor.
[Setup] - [Sensor settings] - [Current Day/Time]
• When you re-connect the TouchFinder to Sensor, the day and time information is acquired,
• If one more than Sensors are connected to the TouchFinder, the day and time information of second connected
TouchFinder is enabled.
Set or Acquire the Date and Time using the external device.
Acquires the Date and Time information by sending a command from the external device.
For details, refer to 5-1 Command Control, Command List, and Command to Write Data in FQ2-S/CH User's
Manual for Communications Settings.
1 Touch [Auto-Sync with TF]
2 Touch [ON].
Important

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English