Omron FQ2-S/CH Series

Changing the Scene to Change the Line Process
FQ2-S/CH User’s Manual
367
7
Convenient Functions
Creating New Scenes
The Default scene number is 0. To create another scene, use the following procedure to switch the scene and
then make the settings.
(Setup Mode) − [Select scene]
Changing Scene Names, Copying Scenes, and Deleting Scenes
(Setup Mode) − [Select scene]
1 Press the number of the scene to change to and
then press [Select].
2 The scene will change. Make the settings for the
scene.
1 Press the number of the scene and then press
[Rename], [Copy], or [Clear].
2 To change the name, enter a new scene name in
15 alphanumeric characters or less.
To copy a scene, press the number of the scene
to copy.