Omron FQ2-S/CH Series User Manual

Display Functions
382
FQ2-S/CH User’s Manual
Displaying a Saved Image
You can display an image that was saved in internal memory in the Sensor or in an SD card. This can be done
to configure inspection items or to check measurements using saved images.
(Setup Mode)
1 Press .
2 You can select one of the following types of im-
ages to display.
[Log]: Images that are logged in the Sensor’s internal memory
[Logging image file]: Images that are logged in the SD card
[Camera image file]: Images that were logged with (Logging Button)
Saving the Currently Displayed Camera Image: p. 416
3 Press the [Back] Button to return to the [Display] Display.
Refer to the following information for the procedures to save images.
Logging Measurement Data: p. 392
Note

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English