Omron FQ2-S/CH Series User Manual

Adjusting Image Quality
FQ2-S/CH User’s Manual
77
3
Taking Images
Adjusting Image Brightness with External Lighting
You can adjust image brightness with external lighting or by setting the Sensor sensitivity.
Using a Strobe Trigger Signal to Control External Lighting
If a Sensor Data Unit is connected, you can change the output time of the strobe trigger signal (STGOUT) to
adjust the brightness.
FQ2-S/CH Series User's Manual for Communications Settings (Cat. No. Z338)
Section 2 Controlling Operation and Outputting Data with a Parallel Connection
Adjusting the Brightness
You can adjust the shutter speed/gain or the brightness to make images brighter. The setting method depends
on whether HDR Mode is ON or OFF. The setting methods are described below.
HDR Function: p. 83
The exposure time will be longer for higher values of the shutter speed or brightness. This may cause the image to
blur if the object is moving fast. If the Sensor is used on a high-speed line, check that the images are not blurred under
actual operating conditions.
Important

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English