Omron FQ2-S/CH Series

Reading with OCR
FQ2-S/CH User’s Manual
159
4
Setting Up Inspections
Setting Date Parameter
Set the date, time or update setting.
［ Inspect ］−［ Inspection ］−［ Add item. ］−［ Details ］ tab −［ Date parameter ］
1 Touch [Period setting], and then set Year, Month and Day.
2 Touch [Date setting], and then set the following settings.
Item Setting Description
Year
Range : 0 to 99
Default；0
Set the usage period from the current date.
Month
Range : 0 to 99
Default；0
Day
Range : -999 to 999
Default；0
Item Setting Description
Zero suppress
•[0]
•Space
Set how the tens digits of the month and day are displayed.
Calculation order
• Month→Day
•Day→Month
Set whether to calculate the month first or the day first when
the usage
period is set. (This affects calculation of end of month.)
Month end adjust
• [Last day of current month]
• First day of next month
• Gap day of next month
Set the adjustment method that will be used if the result of the
expiration
date calculation is an invalid date.