Omron FQ2-S/CH Series

Reading Barcodes
FQ2-S/CH User’s Manual
185
4
Setting Up Inspections
ASCII code table
Reflect in Total Judgment
You can specify whether to reflect the verification result of a barcode inspection item in the overall judgment.
(The Default setting is [Yes].)
[Inspect] − [Inspection] − [Add item.] − [Bar code] − [Details] − [Output parameter] − [Reflect]
The following table shows the ASCII codes that can be used for manual registration of master data and also
for registering characters of Limits.
Note
Upper 4 bits
Lower 4 bits