Omron FQ2-S/CH Series User Manual

Convenient Functions for Operation
FQ2-S/CH User’s Manual
419
7
Convenient Functions
Checking the cause of a sensor NG from the multisensor display
It is easy to check the cause of a sensor NG when multiple sensors are connected.
You can immediately move between the detailed result display of a sensor, the multi-sensor display, and the
result list display.
(Setup Mode) − [TF settings]
1 Press the [Multi sensor button] in [Display setting in Run mode].
(2) Switch sensor display
(3) All results/region display
(1) Detailed results display
(1) Press [Multi sensor] in the detailed results display to move to the Switch sensor display.
(2) In the switch sensor display, press the sensor whose results you want to check. The result list display of that sensor appears.
(3) In the result list display, press the inspection item for which the NG occurred. The detailed results display of the selected
inspection item appears.

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English