Inspecting with the Labeling Inspection Item
310
FQ2-S/CH User’s Manual
4-17 Inspecting with the Labeling Inspection Item
FQ2-S3 FQ2-S4
Labeling
One region of the color you want to measure is counted as a Label. You can sort these labels by position or
size, and assign numbers to them. You can then output the total number of labels, and size and position of a
desired label.
If a Sensor with Color Camera is connected, you can specify up to four colors to measure.
If a Sensor with Monochrome Camera is connected, the image is converted to a black and white binary image.
Then, white pixels are measured.
Color information is extracted
from the measurement object.
Measurement region
Label numbers when sorted by area
Label 0
Label 1
Label 2
Sample Settings Sample Measurement
Regions of the extracted color are detected as labels.
Total number of detected labels: 3
Note
To Next Page
Loading...
