Logging Measurement Data and Image Data
394
FQ2-S/CH User’s Manual
Logging All Data (File Logging)
Large amounts of measurement and image data can be saved in files in external memory (SD cards or computer).
*1: Image data and measurement data can be logged in the same way as for the Touch Finder by installing the PC Tool for FQ.
System Configuration: p. 32
Only the data for the Sensor that is currently being displayed will be logged even if more than one Sensor is con-
nected.
If multiple sensors are displayed, or if the most recent NG sensor is displayed, only the results of the sensor that was
displayed before changing to the other sensor monitor screen will continue to be logged. Simultaneous logging of
the results of multiple sensors is not possible.
Hard disk drive
Computer*1
Saved for each
measurement
SD card
Data logging le
FQ2 Sensor
Image logging le
Touch Finder
Note
To Next Page
Loading...
