Reading 2D Codes (DPM)
210
FQ2-S/CH User’s Manual
Detailed Parameters
When you execute TEACH, the measurement parameters are automatically set corresponded read code.
[Inspect] - [Inspection] - [Add item] - [2D-code (DPM)] - [Details] Tab Page - [Meas. Parameter]
Measurement Parameters
Parameter Setting Description
Code type
DataMatrix
QR Code
Auto (Default)
Sets the type of code to be scanned.
Auto length No
Yes (Default)
Sets whether the code length is automatically acquired.
Size 50 to 480 (Default) Sets the length of the code on the display. (pixels)
Reverse
Normal
Reverse
Auto (Default)
Sets normal image or reverse (mirror) image.
Code color
Black
White
Auto (Default)
Sets the color of the code.
Grid correction ON
OFF (Default)
Set whether grid correction is ON or OFF.
You can set this for DataMatrix and for QR codes.
Fast mode Yes
No (Default)
Sets fast mode.
When ON, the scanning time is shorter.
For certain work, the scanning time may be longer when Fast mode is
ON. Please use after performing test measurements and verifying the
scanning speed.
Shape
(DataMatrix only)
Square
Rectangle
Auto (Default)
Sets the code shape.
QR Code Model
(QR Code only)
Model 1
Model 2
Auto (Default)
Sets the QR Code model.
Error Correction Level
(QR Code only)
L (7%)
M (15%)
Q (25%)
H (30%)
Auto (Default)
Sets the error correction level (ECC level).
(The ECC level of DataMatrix is fixed at 200.)
Cell
(QR Code only)
21 × 21, 25 × 25,
29 × 29, 33 × 33,
37 × 37, 41 × 41,
45 × 45, 49 × 49,
53 × 53, 57 × 57,
Auto (Default)
Sets the number of code cells.
To Next Page
Loading...
