Shortening the Measurement Takt Time
FQ2-S/CH User’s Manual
345
5
Testing and Saving Settings
• FQ2-S1/S2/CH
[Image] − [Camera setup]
Changing the Image Input Mode
Pixel sampling can be applied to the input image to reduce image input time.
[Image] − [Camera setup] − − [Image input mode]
If you change the image input mode, perform teaching again.
1 Press [ ] – [Partial input] on the right side of the display.
2 Change the input size.
3 Press [OK].
4 Press [Back].
Parameter Setting Description
Image Input Mode High-speed
Standard (Default)
Pixel sampling can be applied to the input image to
reduce image input time.
To Next Page
Loading...
