Omron FQ2-S/CH Series

Reading with OCR
178
FQ2-S/CH User’s Manual
Measurement Data That Can Be Logged for OCR
Parameter Setting Description
Judgement
-2: No judgment (not measured)
0: Judgment is OK
-1: Judgment is NG
-11: Model does not match
-13: Measurement time out
-16: Measurement timeout error,
-17: Format not entered error
This is the judgment result.
Similarity 0 to 100 This is the lowest similarity of the read char-
acters.
Stability 0 to 100 This is the lowest stability of the read char-
acters.
Number of read characters on line 1 0 to 32 This is the number of characters that were
read on line 1.
Number of read characters on line 2 0 to 32 This is the number of characters that were
read on line 2.
Number of read characters on line 3 0 to 32 This is the number of characters that were
read on line 3.
Number of read characters on line 4 0 to 32 This is the number of characters that were
read on line 4.
Individual similarity 0 to 100 This is the similarity of read character N (N
= 0 to 127).
Individual stability 0 to 100 This is the stability of read character N (N =
0 to 127).