Omron FQ2-S/CH Series

Saving Sensor Settings
406
FQ2-S/CH User’s Manual
7-7 Saving Sensor Settings
FQ2-S1
FQ2-S2
FQ2-S3 FQ2-S4
FQ2-CH
The Sensor settings are saved in flash memory inside the Sensor.
This section describes how to back up the settings in and restore them from an SD card or other external
memory.
Backing Up Settings in External Memory
(Setup Mode) − [Save to file] − [Setting] Tab Page
1 Press the data to save.
2 Enter the file name in 15 characters or less.
After entering the file name, press [OK]. The data
will be saved and the display will return to [Save to
file].