Omron FQ2-S/CH Series

Saving Sensor Settings
FQ2-S/CH User’s Manual
407
7
Convenient Functions
Applicable Data
*1: For the PC Tool, data will be saved in the following folder: \\..\My Documents\OMRON FQ\SDCard\
*2: Only supported on the FQ2-S4/CH Series.
Data Storage location
*1
Description
Scene data
(The file name extension is SCN.) \sensor_name\SCN
The following data are backed up for each scene.
Settings for all inspection items
Order of inspection items
Scene group data*
2
(The file name extension is
SGP.)
\sensor_name\SGP
All scene data are backed up.
Calibration data
(file name extension: CLB)
\sensor_name\CLB The calibration data are backed up.
Calibration group data
(file name extension: CGP)
\sensor_name\CGP All calibration data are backed up.
Dictionary data*
2
(The file name extension is DIC.)
\sensor_name\DIC Dictionary data are backed up.
All dictionary data
(The file name extension is DGP.)
\sensor_name\DGP All dictionary data are backed up.
Code data*2
(file name extension: .csv)
\sensor_name\CODE Code data will be backed up.
Sensor system data
(The file name extension is
SYD.)
\sensor_name\SYD All system data in the Sensor are backed up.
The system data are the same for all scenes.
All Sensor data
(The file name extension is
BKD.)
\sensor_name\BKD All settings in the Sensor (scene group data, Sensor system
data, calibration group data, and all dictionary data
*2
) are
backed up.
Touch Finder data
(The file name extension is
MSD.)
\MSD All settings in the Touch Finder are backed up.