Omron FQ2-S/CH Series User Manual

Installation
FQ2-S/CH User’s Manual
39
2
Installation and Connections
2-3 Installation
FQ2-S1
FQ2-S2
FQ2-S3 FQ2-S4
FQ2-CH
Installing the Sensor
FQ2-S/FQ2-CH1-M (Sensors with Built-in Lighting)
Installation Procedure
1 Align the tabs on one side of the Mounting Brack-
et with the slot on the Sensor.
The FQ-XL Mounting Bracket can be attached to the
back, side, or front of the Sensor.
2 Press the Mounting Bracket onto the Sensor until
the other tabs click into place.
3 Use the following optical charts to check the field
of view and installation distance of the Sensor so
that it is mounted at the correct position.
Tightening torque (M4): 1.2 N·m
Mounting
Bracket

Omron FQ2-S/CH Series Specifications

General

Brand	Omron
Model	FQ2-S/CH Series
Category	Digital Camera
Language	English