Omron FQ2-S/CH Series

External Reference Parameters
492
FQ2-S/CH User’s Manual
Two-edge Position Compensation
310 Logging
condi-
tions
Data logging switch for
entire unit
Set / Get 0: Data logging OFF
1: Data logging ON
0 --- ---
311 Data logging switch for
judgement
Set / Get 0: Data logging OFF
1: Data logging ON
0 --- ---
312 Data logging switch for
scroll X
Set / Get 0: Data logging OFF
1: Data logging ON
0 --- ---
313 Data logging switch for
scroll Y Set / Get
0: Data logging OFF
1: Data logging ON
0 --- ---
314 Data logging switch for
detected edge position
X
Set / Get
0: Data logging OFF
1: Data logging ON
0 --- ---
315 Data logging switch for
detected edge position
Y
Set / Get
0: Data logging OFF
1: Data logging ON
0 --- ---
700
Display
settings
Position compensation
X display Set / Get
0: ON
1: OFF
0 --- ---
701
Position compensation
Y display Set / Get
0: ON
1: OFF
0 --- ---
702
Detected edge position
X display Set / Get
0: ON
1: OFF
0 --- ---
703
Detected edge position
Y display
Set / Get 0: ON
1: OFF
0 --- ---
External
refer-
ence
number
Category Data name
Set / Get
Data range Default Expres-
sion text
string
Logged data/
Judgement
parameter
0
Mea-
sure-
ment
result
Judgement Get only
−2: No judgement (not measured)
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error
−14: Figure not registered error
−15: Out of range error
−2 JG Logged data
5 Scroll X Get only −99,999.9999 to 99,999.9999 0 DX Logged data
6 Scroll Y Get only −99,999.9999 to 99,999.9999 0 DY Logged data
7 Detected edge position
X0
Get only −99,999.9999 to 99,999.9999 0 X0 Logged data
8 Detected edge position
Y0
Get only −99,999.9999 to 99,999.9999 0 Y0 Logged data
9 Detected edge position
X1
Get only −99,999.9999 to 99,999.9999 0 X1 Logged data
10 Detected edge position
Y1
Get only −99,999.9999 to 99,999.9999 0 Y1 Logged data
11 Standard position X0 Get only −99,999.9999 to 99,999.9999 0 SX0 Logged data
12 Standard position Y0 Get only −99,999.9999 to 99,999.9999 0 SY0 Logged data
13 Standard position X1 Get only −99,999.9999 to 99,999.9999 0 SX1 Logged data
14 Standard position Y1 Get only −99,999.9999 to 99,999.9999 0 SY1 Logged data
External
reference
number
Category Data name Get / Set Data range Default Expres-
sion text
string
Logged data/
Judgement
parameter