Inspecting with the Edge Pitch Inspection Item
288
FQ2-S/CH User’s Manual
4-14 Inspecting with the Edge Pitch Inspection Item
FQ2-S3 FQ2-S4
Edge Pitch Inspection Item
This inspection item is used to detect edges through changes in brightness within a region.
Edges of the specified color in one measurement area are found and the number objects, object width, and
pitch are output.
Setup Procedure for Edge Width Inspection Item
Step 1 Selecting the Inspection Item
[Inspect] − [Inspection]
1 Press an unused inspection item number and press [Add item.].
2 Press [Edge Pitch].
Registering inspection items: p. 138
Drag the arrow at the bottom of the menu upward to display all of the inspection items.
Sample Settings Sample Measurement
Measurement region
Target color: Dark
Pitch
(distance between center points)
Width
Number
of objects
Note
To Next Page
Loading...
