Convenient Functions for Operation
416
FQ2-S/CH User’s Manual
Saving the Currently Displayed Camera Image
You can save the Camera image that is displayed on the Touch Finder or computer.
(Setup Mode) − − (Log Image Button)
The Camera image that is being displayed when the Button is pressed is saved in external memory.
• Storage Location and File Names
Make sure an SD card is inserted in the Touch Finder before capturing display images.
Setting the Startup Run Display Pattern
You can select the startup run display pattern. This only appears when [Start screen type] under [Startup
display] is set to [Single sensor].
(Setup Mode or Run Mode) − [TF settings] − [Startup display] − [Display pattern]
1 Select from the following: [Graphics], [Graphics + Details], [Statistical data], [All results/region],
[Trend monitor], or [Histogram].
Storage location File name
\CAPTURE
YYYY_MM_DD-HH_MM_SS.IFZ
Example: The following name would be used for an image that was captured
at 10:10:21.350 pm on March 10, 2010: 2010_03_10-22_10_21_350.IFZ
For the PC Tool, data will be saved in the following folder: \\..\My Documents\OMRON FQ\SDCard\
The Default display setting for startup can be changed.
Selecting the Display When More Than One Sensor Is Connected: p. 389
Note
Note
To Next Page
Loading...
Need help?
General
